Commercial Truck Roll-Up Door Repair in Farmington Hills
Repair and maintenance for commercial truck roll-up doors.
Commercial Roll-Up Door Repair Services
Garrett Auto & Truck Service provides commercial truck roll-up door repair and maintenance in Farmington Hills. We can inspect door operation, cables, rollers, hinges, tracks, and lubrication points, then explain the repair or maintenance work your truck body needs.
For broader commercial vehicle work, visit auto and truck repair in Farmington Hills.
Important Safety Information
An overhead door is a large, heavy object that moves with the help of a spring that is under high tension. Since moving objects and springs under tension can cause injuries or death, your safety and the proper operation of the door depend on you.
Door Maintenance Tip
Lubricate the counterbalance, bearings, rollers, hinges with Lube. Do not use grease.
Wipe dirt from track. Frequency of door maintenance will vary with climate conditions and door cleaning procedures.
Doors which are steam cleaned will need lubricating more often
Doors on equipment which is run in areas where road salts are used will require lock lubrication at closer intervals
Note: Do not use any petroleum-based lubricant on rubber door seals
This is typical roll-up door operator
Inside view: arrows pointing to lube points
Should be lubricated once every two weeks
Door Maintenance Tips
One of the quickest and easiest ways to prolong the life of your overhead doors is to keep the counterbalance springs lubricated. The spring is a moving part that winds and unwinds, so lubrication makes its operation easier. It also helps prevent rust, which can inhibit movement.
Spend just five minutes lubricating the springs on your doors every month, and you'll add years to their service life.
Professional Roll-up Door Repair
Garrett Auto & Truck performs repairs on all make and models of Roll-up doors.
From One roller to a complete door assembly.
Starting at just $599.00
We almost forgot to mention the lift cables...
A properly counterbalanced door should, when stopped, remain at any given location. If the door has a tendency to drop when stopped, a few more quarter turns should be added, or the door may be in need of repair.
Safety Tip:
Watch for fraying of the cables; cables must have even tension at all times. If not severe injury may occur.
Complete Roll-up Door Services
Repairs
All makes and models, from single roller to complete assembly
Maintenance
Lubrication, inspection, and preventative care
Safety Inspections
Cable tension, counterbalance, and safety checks
Expert Roll-up Door Service & Repair
Professional service for all makes and models
Call (248) 478-838224175 Industrial Park Dr., Farmington Hills, MI 48335
